VanTop V9H Dash Cam Hardwire Kit. 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit with Tool

TIPS:
?We strongly recommend the professional installation of the Hardwire Kit.
?Please make sure the ignition is off before installing the Hardwire Kit.
?Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
?For safety reasons. we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components. such as the Air Bags.

Installation Steps:
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera. and then the installation is completed.

• Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam. 
• Multiple Security Protection – With low voltage protection. V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current. short-circuit. reverse connection. and overheat.
• 24 Hours Surveillance – With VanTop V9H hardwire kit. the continuous power supply makes parking monitoring function more reliable. Besides. supported by the time-lapse shooting function to maximize the advantages of memory.
• High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices. such as dash cam. mirror dash cam. GPS navigator. and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
• Easy Installation – You will get 1 x hardwire kit. 4 x fuse taps and blade fuses. 1 x easy pry tool. and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
• Specification:
  Input Voltage: DC12V/24V
  Output Voltage: 5V-2.5A Max
  Working Temperature: -40~160??F
  Over-current Protection: 2.5A
  Low Voltage Protection: 11.6V??0.2/23.5V??0.2
  Connector Type: Mini USB
  Cable Length: 3.5M/11.5FT
  
  
  Package List:
  1 x Hardwire Kit
  4 x Fuse Tap
  4 x Blade Fuse
  1 x Easy Pry Tool
  1 x Quick Guide