Rockville RXM-S20 Micro Marine/ATV Amplifier 1600w Max 4 Channel 4x100w

Videos of RXM-S20:

Includes:

• Amplifier
• PA Microphone
• Mounting Hardware
• Owners Manual

Features:

• Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included!
• PA Microphone with talkover – When you talk on the mic it will must the music and when you stop talking the music will come back on
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
• 300 Watts (4 x 75 Watts) at 4 ohms and 1% THD+N
• 400 Watts (4 x 100 Watts) at 2 ohms < 1% THD
• 400 Watts (2 x 200 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
• Marine amplifier with conformal coated PCB board
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Double Sided Surface Mount (SMD) PCB Design 
• Selectable +6dB/+12dB Bass Equalizer @ 45hz
• Channel Separation: 50 dB
• Current drawn @ MAX RMS output: 27A @ 4ohm. 40A @ 2ohm
• Efficiency @ MAX RMS output: 70% @ 4ohm. 63% @ 2ohm
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable
• Input sensitivity: 200mV-6V
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• 2 CH / 4 CH Input Mode Switch
• RCA Preamp Line Output
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• THD+A: 0.01%
• Frequency Response: 15Hz – 20KHz

• Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included!.
• PA Microphone with talkover – When you talk on the mic it will must the music and when you stop talking the music will come back on. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 300 Watts (4 x 75 Watts) at 4 ohms and 1% THD+N. 400 Watts (4 x 100 Watts) at 2 ohms < 1% THD.
• 400 Watts (2 x 200 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc). Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design . Selectable +6dB/+12dB Bass Equalizer @ 45hz.
• Channel Separation: 50 dB. Current drawn @ MAX RMS output: 27A @ 4ohm. 40A @ 2ohm. Efficiency @ MAX RMS output: 70% @ 4ohm. 63% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Input sensitivity: 200mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry.
• Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz – 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable High Pass Crossover: 50HZ – 250HZ. CH1 & CH2 High Pass 50Hz – 250Hz. CH3 & CH4 Low Pass 50Hz – 250Hz. CH3 & CH4 High Pass 50Hz – 250Hz.