VIOFO HK3-C Acc Hardwire Kit. 13ft USB-C Hard Wire Kit for A139 Dash Cam. Low Voltage Protection

FOR A139 DASHCAM

Not applicable to A129 series. A119V3

HK3-C Hardwire Kit Cable For A139 2CH/3CH Dash Camera with Type-C USB Port

Note: Fuse Tap is not included default. please choose your required Fuse Type Options.(You can confirm the proper option from your local car store or from our viofo support)

If cannot make sure of the specific type. consider this Full Set Fuse Tap with ATC ATS MICRO2 Mini Adapter Holder.

HK3-C isn’t compatible with Mini Port A119V3/A129 Duo/A129 Duo IR/A129 Pro Duo/A129 Plus Duo Dash Camera.

• 24 Hours Parking Surveillance – When the engine is off. HK3-C hardwire kit provides continuous power to the camera. any collisions. event will be recorded.
• Low Voltage Protection – HK3-C hardwire lets you set a voltage cut-off value with 4 options. when the voltage of vehicle’s battery drops to the cut-off value. it will stop powering your dashcam. thus protecting your battery from discharge.
• Automatically switch parking mode – With ACC detection. the dash cam will switch to parking mode automatically if the vehicle engine is off. The dash cam will switch into normal recording when the vehicle engine is on.
• 12 / 24V Compatible – HK3 ACC Hardwire kits connects the camera directly to the car. truck. bus. SUVs. or big rig for continuous power. accepts voltage from any type of vehicles runs on 12 ?C 24V.
• The red battery cable should be connected to constant power. The ACC yellow cable should be connected to ignition. The Ground cable should be connected to vehicle body. Note: You need to prepare 2pcs fuse tap to work with the hardwire cable.