170?? HD 8 LED CMOS Car Wireless Backup Rear View Reverse Camera Night View Kit

170?? HD 8 LED CMOS Car Backup Rear View Camera Reverse Night Vision CAM Kit Waterproof + 2.4GHz Wireless Video Transmitter and Receiver kit

Note:
The Car Rear View Camera and Wireless Transmitter/Receiver kit Not all-in-one.They are two separate parts. you only need to connect the two parts to achieve the wireless effect.

Car Rear View HD camera Specifications:
Feature:
1.100% brand new and high quality guaranteed.
2.Anti-fog glass. CMOS imaging sensor.
3.High definition and up to 170 degrees wide viewing angle.
4.Support color CMOS image.
5.Support NTSC/PAL video system.
6.This camera can give you a full sight of the back of your car when you are driving.
7.It’s a night vision camera. you can easily get a clear situation in the dark.
8.With the high sensitivity. you can get rid of poor rear vision.
9.IP67 waterproof design. shock-proof and anti-jamming functions.
10.It helps to avoid incidents. accidents abrasion and ensure your safety.
11.Compact design. easy to install and operate.
12.Can connect to any type of monitor with a composite yellow RCA jack.
13.Applicable to a variety of Vehicles: car. truck. RV. etc.

Specification:
Effective Pixels: 648 x 488 Pixels
LED Quantity: 8 LED
Lens Angle: 170 degrees
Image pipeline feature: Auto exposure. AWB. AGC. Auto flicker detection and cancellation
Video System: PAL/NTSC(Automatic throw-over)
Minimum Illumination: 0.2Lux(0Lux with IR on)
Scanning System: 2:1 Interlace
Resolution : 420TV lines
Electronic Shutter: 1/60(NTSC) / 1/50(PAL)1/1000s
Gamma Coefficient: 0.45
S/N Ratio: 45.6db
Dynamic Range: 63.5db
Waterproof Grade: IP 68
Operation Temperature: -20?? +75??
Storage Temperature: -40??+85??
Video Output: RCA connector. 1.0vp-p. 75Ohm
Working Power: DC12V
Current Consumption:60mA

2.4GHz Wireless Video Transmitter and Receiver Specifications:
1. Frequency: 2370MHz
2. Power output: 100Mw
3. Voltage: dc=12v
4. Video in/out: PAL/NTSC composite video signal
5. Signal range: 100m (in jam-free open areas)
6. Working temp: -20 degree- +80 degree
7. Receiver Sensitivity: -85dBm
8. Working current: dc=12v 200mA
9. GPS power out: dc=5v 1.5a
10. AV out interface: RCA jack

Feature:
Wireless RCA video transmitter & receiver kit for Car rear view camera
Wireless RCA video receiver/transmitter; avoid complicated wiring. To be used with in-car monitor. head unit. DVD player and camera. etc.
Receiver/transmitter frequency: 2370MHz
Av in/out: PAL/NTSC Composite video signal. RCA jack
Receiver/transmitter distance: 100m (in jam-free open areas)
Wireless receiver transmitter takes no trouble with running video cable. Mainly used for wireless connection on light vehicles for video output to monitor. head unit. DVD player and camera. Etc.
Wireless RCA Video receiver / transmitter; avoid complicated wiring. to be used with in-car monitor. backup system. Only when you pull reverse. monitor will automatic show backup picture. You could connect all parts to constant power or 12V battery. monitor will show picture full time.

Package Included
1 x Car Rear View Camera
1 x DC Power Cable
1 x Video Cable
1 x wireless receiver
1 x wireless transmitter
1 x Manual170° HD 8 LED CMOS Car Wireless Backup Rear View Reverse Camera Night View Kit