How to Use
1.Insert the grooved end of the pressure lever into the return valve and tighten clockwise.
2.Adjust the height of the adjusting screw according to the height of the car body.
3.Insert the jack handle into the handle sleeve.
4.Shake the handle up and down to lift the body to the desired height smoothly.
5.When lowering. turn the return valve counterclockwise 1-2 turns. remember to turn slowly. and the return valve can not loose more. otherwise it will lead to oil leakage.
Specifications
Material: Alloy Steel
Process: Baking Paint
Operation Temperature: -20~45??C/-4~113??F
Body Height: 26cm/10.23in
Lifting Height: 15cm /5.9in
Adjustment Height: 6cm /2.36in
Maximum Lifting Height: 47cm /18.5in
Housing Diameter: 14cm/5.51in
Base Size: 18.4*16cm/7.24*6.29in
Product Height: 26cm/10.23in
Package Included
1* Hydraulic Cylinder Jack
3* Levers
1* English Manual
Notes
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.This is a hydraulic jack and cannot be used for jacking or fixing for a long time.
3.It is prohibited to screw out the oil valve. otherwise the use of the product will be affected.
4.Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load. If the jack cannot be lifted. please check whether the oil valve is tightened.
5.Park the vehicle on a level and hard ground before using the jack. and open the danger warning sign behind you. When the jack supports the vehicle. it is strict
-
??Sturdy and Durable??Made of high-quality alloy steel with baking paint treatment on the surface. very reinforced. anti-oxidation. anti-rust. and impact-resistant. for a strong inclusive working environment as well as ensuring a long service life.
-
??Powerful Lifting Force??The smooth surface of the piston rod is beautiful. anti-corrosion. and also has strong pressure resistance. with a strong lifting force of 50T/110.231 lbs.
-
??Sufficient Lifting Height??In addition to the height of the jack body (10.23in). the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke. so that the jack can be lifted higher (up to 18.5in) to a wider range of uses.
-
??High / Low-Temperature Resistance??The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4??F and 113??F. It uses a rubber oil plug with a seal inside. which ensures a good seal against oil leakage.
-
??High Safety??The Bottle Jack equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time. the height-limiting device prevents over-pumping and gives you safety assurance.
Specifications
Brand | Miumaeov |
Reviews
There are no reviews yet.