Rockville ATOM S20 Marine Bluetooth Amplifier 1600w 4 Channel/Volt Meter+PA Mic

ATOM S20 PRODUCT VIDEO:

Description:

The all new ATOM marine series of amplifiers gives you the best of both worlds! Small footprint and big power! These amps also have great features like built in Bluetooth wireless audio playback and a built in volt meter and a microphone.

The ATOM S20 is a class A/B 4-Channel high power amplifier with 1.600 watts peak output and 440 watts true RMS power. The RMS power is tested on a dyno using the certified run. It puts out 110 watts x 4 channels at less than 1% THD at 14.4 volts. We give the true power and the peak rating so you can easily compare this amp to any brand on the market regardless how they like to rate their products.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker. Rockford. Alpine. etc.

The ATOM S20 includes a PA microphone allowing you to make announcements to your friends and family.

What’s in the Box:

Amplifier
PA microphone
Birth sheet with Dyno-tested power
Mounting Screw Kit
Owner’s manual
Warranty

Features:

Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
2 Ohm: 110 Watts x 4 Channel <1% THD+N @ 14.4 Volts
4 Ohm: 70 Watts x 4 Channel <1% THD+N @ 14.4 Volts
4 Ohm Bridged: 220 Watts x 2 Channel <1% THD+N @ 14.4 Volts
Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
2 Ohm: 400 Watts x 4 Channel
4 Ohm: 260 Watts x 4 Channel
4 Ohm Bridged: 800 Watts x 2 Channel
Digital Voltage Display on Amp
Microphone input and PA microphone included
Adjustable Low Pass Filter: 50Hz – 250Hz
Adjustable High Pass Filter: 50Hz – 250Hz
Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
Rustproof Aluminum heat sink with silver hairline finish
Stainless steel end panels are rustproof
All screws and mounting hardware are stainless steel and rustproof
Bottom panel is aluminum and rustproof
4 Gauge power and ground terminals
10 Gauge speaker wire terminals
All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
All channels on the amplifier are bridgeable
Built in Bluetooth Wireless Audio Streaming
High-Speed MOSFET Power Supply
Under Voltage Protection at 10V
Over Voltage Protection at 16V
Tertiary Supplies Circuitry
Studio-Grade Bipolar Output Stage Transistors
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Full IC-Controlled Protection Circuitry
Fully Adjustable 12dB Bass Equalizer
Adjustable Input Level Control
Mute and Delay Soft Start System
2CH/4CH Input Mode Switch
Bluetooth On and Off Mode Switch
RCA Line Output
8 Volt Preamp

• Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth.
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 2 Ohm: 110 Watts x 4 Channel <1% THD+N @ 14.4 Volts. 4 Ohm: 70 Watts x 4 Channel <1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 220 Watts x 2 Channel <1% THD+N @ 14.4 Volts.
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc). 2 Ohm: 400 Watts x 4 Channel. 4 Ohm: 260 Watts x 4 Channel. 4 Ohm Bridged: 800 Watts x 2 Channel. Digital Voltage Display on Amp. Microphone input and PA microphone included. Adjustable Low Pass Filter: 50Hz – 250Hz. Adjustable High Pass Filter: 50Hz – 250Hz. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue).
• Rustproof Aluminum heat sink with silver hairline finish. Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. 4 Gauge power and ground terminals. 10 Gauge speaker wire terminals. All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable.
• Built in Bluetooth Wireless Audio Streaming. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Adjustable Input Level Control. Mute and Delay Soft Start System.