(4) Rockville RMSTS69B 6×9 2000w Waterproof Marine Boat Speakers 2-Way Black

Package Includes:

Pairs of Rockville RMSTS69B 6×9 Waterproof Marine Speakers Totaling 2000 Watts!

The RMST series of marine speakers by Rockville is our step up series that offers a 1? titanium tweeter as well as more power handling! This 6×9 model can handle They have a larger magnet and can handle 125 watts RMS & 500 watts peak each speaker! If you are using an external amplifier we recommend this series because they can handle a lot of power!

These speakers are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Rockville engineers care about quality and sound more than anything else. The RMST69 was designed in a molded ABS plastic basket. The polypropylene cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The 1? titanium tweeter puts out incredible sounding highs. The low end bass and mids of these speakers really makes them stand out.

The RMST69 6×9? marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater. freshwater or any other harsh environments. These speakers can withstand tons of abuse and can handle 500 watts peak and 125 watts RMS each. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage. the Rockville RMST69 speakers were able to handle more than double the power!)

Using only true marine grade components and materials. the Rockville RMST69 speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water. salt water. or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers.

These speakers come with everything you need for installation including pre mounted grills and mounting hardware.

What’s Included:

Pair of 6×9? marine speakers
16.4 feet of Speaker Wire
Mounting Screws

Speaker Features:

Rockville RMST69 6×9 2-Way 500 Watt Marine Boat Speakers Black
CEA Compliant Power Ratings
Power Rating: 500 Watts Peak /125 Watts RMS Per Speaker
System Power: 1.000 Watts Combined
6×9 2-Way Speaker System
Fully Marinized Against Salt & Fresh Water Conditions
Completely Waterproof and rustproof
Stainless Steel Terminals
Molded ABS plastic basket
Polypropylene Mica Injected Cone
Rubber Surround
High quality ferrite magnet
1 inch Titanium Tweeter
Oversized 1.2 CCAW Kapton Voice Coil
Large 20 Oz Magnet
Pre-installed mounting screws included
Perfect for both marine. outdoor. and car use
Impedance: 4 Ohms
Frequency Response: 40Hz – 20KHz
Sound Pressure Level: 91dB @ 1w/1m
Total Diameter: 7.8 x 10.55
Cutout Diameter: 6.06 x 8.98
Total Height: 4.45
Mounting Depth: 3.43

• Pair of 6×9 marine speakers. 16.4 feet of Speaker Wire. Mounting Screws. Speaker Features: Rockville RMST69 6×9 2-Way 500 Watt Marine Boat Speakers Black. CEA Compliant Power Ratings
• Power Rating: 500 Watts Peak /125 Watts RMS Per Speaker. System Power: 1.000 Watts Combined. 6×9 2-Way Speaker System. Fully Marinized Against Salt & Fresh Water Conditions
• Completely Waterproof and rustproof. Stainless Steel Terminals. Molded ABS plastic basket. Polypropylene Mica Injected Cone. Rubber Surround. High quality ferrite magnet. 1 inch Titanium Tweeter
• Oversized 1.2 CCAW Kapton Voice Coil. Large 20 Oz Magnet. Pre-installed mounting screws included. Perfect for both marine. outdoor. and car use. Impedance: 4 Ohms. Frequency Response: 40Hz – 20KHz
• Sound Pressure Level: 91dB @ 1w/1m. Total Diameter: 7.8 x 10.55. Cutout Diameter: 6.06 x 8.98. Total Height: 4.45. Mounting Depth: 3.43