1.5A Automatic Smart Charger. DFITO 6V/12V Car and Motorcycle Portable Battery Charger. Battery Maintainer

Feature??

  ?? 6V/12V Selectable Output-This device is 4 stages smart battery charger by microprocessor controlled with switch mode for 6V and 12V is selectable output. It is ideal for charging your CAR. MOTORCYCLE AND RIDE-ON TOY batteries. and great for agm gel vrla sla wet cell and all Lead Acid Batteries     

  ?? 2 DC Connector-Two kinds of battery clamps. including battery clamps. battery rings for a more secure connection to battery terminals. can choose battery clamps which suit your equipment.               

  ?? Easy charging-The battery clamps make it exceptionally easy to charge your car’s battery overnight.         

  ?? Automatic charging/ maintaining-The device is fully automatic to identify the level of charge on any type of battery and maintain a level of maximum charge and it’s high frequency charging technology.  

  ?? Long lasting-The charger is built to last. with a fully sealed outer case. protecting it from dust. oil. and moisture. to prevent corrosion or other damaging effects of weather exposure.

  ?? Easy to use:Completely automatic and may be left connected to both AC power and to the battery that it is charging for long chargers have a status indicator LED that provides a visual means to determine the operating mode of the charger and hence the condition of the battery connected to the charger.It has reversed Hook-Up protection. spark proof. quick disconnect harness;

  ?? Just connect and Forget It: Once connected. the trickle charger manages your battery’s health on it’s own.

  ?? User Friendly: All cables are 100% tested. any open miswiring and shot are not permitted.

4-stage charging process ??

• Stage 1: initialization. when the charger power on then it start self-check and detect the battery correct connect. low output voltage without battery Fault LED is light. please CHECK THE POLARITY IS CORRECT. 
• Stage 2: Bulk charge. using the charger highest rated current for the type of battery in use until it reaches 80% capacity( LEDs 50% blinking. 100% OFF) 
• Stage 3: Absorption. the output voltage is limited to 7.3V(6V battery) or 14.5V(12V battery) while current declines as the battery charges to its full capacity without overheating( LEDs 50% ON .100% blinking) 
• Stage 4: Float. at this stage. the battery is fully charged and the charger maintains the battery through pulse charging( LEDs 50% ON .100% ON) 

SPECIFICATION??

• Input: 100-240V AC@50/60Hz 0.5rms
• Output: DC 6.9V@ 1.5Amp/ DC [email protected] 
• Limited voltage: 7.2~7.3V or 14.5~14.7V
• Float current: 300mA~400mA
• Charging mode: Fully automatic
• Suitable battery: 6V or 12V AGM GEL VRLA SLA WET
• Charging Battery: 6-12Ah
• Maintaining Battery: 4-36Ah
• Safety: EN60950-1 EN60335
• EMC: EN55022
• Approved: CE RoHS

Package content:

• 1 * battery charger
• 1 * DC Output cable with Clip connectors
• 1 * DC Output cable with ring connectors
• 1 * User’s manual