2022 v-Linker MC+ ELM327 Bluetooth 4.0 OBD 2 OBD2 ELM 327 wifi Car Diagnostic For Android/IOS Scanner Auto Tool PK OBDLINK
Please refer to your car\’s user manual or check with your car dealer or local car factory to see if your car is compatible with this product
compatible with 95%+ world car models
1.Data buffer to 2K bytes. UART baud rate increased to 230. 4 Kbpsc
2.Support Almost All ELM327/ELM329/OBDLINK Adapter Software
3.Automatic sleep and start to reduce power consumptione
4.OBD2 Standard Protocols+More protocols
5.Support user-defined commands
6.Request bytes to 48 bytes
7.Support Firmware Update
8.Support user-defined APP
Multiple protocols??

–15 ELM format protocols;

— 23 STN format protocols;

— to 64 user-defined protocols.

OBDII 5 standard protocols??

— SAE J1850 VPW

— SAE J1850 PWM

— ISO 9141-2

— ISO 14230-4

— ISO 15765-4 CAN

Additional protocols??

— SAE J1939 CAN

— ISO 11898 ( CAN)

— for GMLAN Single Wire CAN (for GMW3089)

— for Medium Speed CAN (MS CAN) 

These protocols cover almost 99% of the OBDII Cars on the market

Software Support??

Perfect compatibility: For Bimmer Code/For Torque/For Forscan/For JScan/For Auto Doctor/For OBD Fusion etc. 99% APP Software

Rich instruction set. compatible with more APP software??

— Fully compatible with ELM\’s AT set; 

— Fully compatible with STN\’s ST set; 

— Expanded 7 AT commands for HS-CAN. MS-CAN. SW-CAN; 

–39 VT macro commands. some instructions are equivalent to the effect of several AT and ST instructions. simplifying the communication steps. 

— Compatible with ELM and STN power management solutions.

— Support for instructions. UART silence. battery low voltage. OBD bus silence. etc. to 5 ways to go to sleep;

— Support UART active. battery voltage drop. OBD bus active. key. etc. to 5 ways to wake from sleep .

— Device sleep power consumption is less than 2 mA.

— OBD request byte to 48 bytes. can meet the needs of some special long frame communication.

— UART data buffer to 2K bytes. baudrate increased to 230.4Kbps.

— 256-byte unit

— More than 100.000 erasable times

— Read and write operations on any unit in the area by using the VT

— Mix ID Sending of CAN protocol.

— Optional formatted send data according to protocol

— Multiple WM sequence settings

— Support AT to manually set WM sequence

— Support for specifying a protocol or a full protocol-wide temporary WM sequence

— Support for a permanent link between a protocol and a private WM sequence

— Secure bootloader for easy firmware updates 

Typical Applications??

? Vehicle telematics

? Fleet management and tracking applications

? Usage-based insurance (UBI)

? OBD data loggers

? Automotive diagnostic scan tools and code readers

? Digital dashboards 

Special :

Fully automatic identification of vehicle protocols.quick reading of vehicle information

Fully automatic standby/start.no manual switch button required

Connection method:

BT4.0/3.0??

1.Turn on theIgnition in the car

2.Plug in the adapterinto the OBD Port

3.Turn on Bluetooth.Bluetooth only needs to turned on

4.Open OBD Auto Doctor choose Extras .cick Connectivity.choose Bluetoothand  vLinker MC+ Drop out software and Enter again

WIFI??

1.Turn on theIgnition in the car

2.Plug in the adapterinto the OBD Port

3.Turn on WIFI.connected vLinker

4.Open OBD Auto Doctor choose Extras .cick Connectivity.choose WIFI .Drop out software and Enter
again

2024 New v-Linker MC+ ELM327 Bluetooth 4.0 OBD 2 OBD2 ELM 327 wifi Car Diagnostic For Android/IOS Scanner Auto Tool PK OBDLINK