20W Magnetic QRP Loop Antenna for HF Transceivers. Compatible with Icom-705

Specifications:
Frequency Range:
144??148MHz
430-440MHz
7??30MHz
aeronautical band
FM radio also provides excellent reception

Tuning box:
Band selection switch. pull up 7MHz. pull down 14-30MHz
The upper knob is the frequency tuning knob. and the frequency tuning value does not change due to changes in the environment.
The lower knob is the impedance matching knob. and the impedance matching value will change due to changes in the environment.
Data transfer: 10W
SSB: 20W

installation method:
Use the right angle adapter and double male butt to connect the antenna to the m seat on the back of the radio and stand up or connect the ring body to the connector on both sides of the controller and tighten it. then mount the tripod to the mount on the back of the tuner . open the tripod. place the antenna body firmly on the tripod. and finally connect the feeder (the feeder is attached with a choke. and one end of the choke is close to the small loop antenna).

Note: It is best for outdoor use. indoor use of the antenna as close to the window as possible. in a fully enclosed environment with reinforced concrete. against a wall and other environments. the VSWR of some frequency bands is not ideal.

The Scope of Use:
HF: 5~30MHz
Power: 20W
SWR: <1.2 (7MHz. 10MHz. 14MHz. 21MHz and 29MHz)
FM: 76~108MHz
VHF + Aviation Band: 110~150MHz
UHF: 400~450MHz

Package Included:
1X small loop antenna
1X2 meters transmitting antenna
1X5 meters 50 ohm coaxial cable
3X adapter

20W Magnetic QRP Loop Antenna for HF Transceivers. Compatible with Icom-705