Bemico Argon CO2 Welding Regulator Mig Tig Flowmeter Regulator Gauge Welder CGA580 With Gas Hose

Reduces and controls the pressure of gases for welding work. Applicable for many kinds of gases. such as CO2. argon. etc. Adopts piston decompression method. gas of high pressure enters into the regulator and then low-pressure releases. Can see numerical values of the LPM of carbon dioxide and argon from the transparent tube. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.

Specification:

• Pressure Range:0-4000 PSI
• Volume Range: 5-25 LPM (kgf/c?O) (1 liter/min equals 2.12 cubic foot per hour)
• Material: PC + Copper(Brass Body construction)
• CGA 580 Inlet

Features:

• Economy-style flow meter regulator.
• Single-stage piston design.
• Machined brass body.
• Combination of regulator and flow meter as one unit.
• The polycarbonate flow tube and outer cover impact resistant for maximum durability.
• Compact lightweight construction.
• Dual scale gauge with unbreakable polycarbonate lens for durability.
• Flow Meters are more accurate than flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.
• The output flow is adjustable from 5 to 25 lpm. and is indicated by a ball that moves up and down in the flow tube. so this flow meter will handle MIG and TIG welding of both steel and aluminum.
• The fitting is a CGA-580 fitting. so it fits all argon. helium. nitrogen. and argon/CO2 mixed gas tanks
• 11. the outlet will fit both the female 9/16 – 18 nut or the male 9/16 – 18 fittings. it comes with a standard 1/4 barbed fitting

Package Include:

• 1 x Gas Flow Meter Pressure Reducer
• 1 x Joint
• 1 x Screw Nut
• 1 x Gas Hose Pipe