Car Emergency Relay Smart Ignition System Battery Jump Cable Connection Jumper Cable 500A Car Accessories

Instruction:
1.Connect the red and black battery clips to the positive and negative of car battery.
2.Insert plug of battery clips into start outlet of start power.
3.Turn auto key to start shift to start auto.
4.If the auto can not be started. turn the key after several seconds until it is started successfully.
5.Afterwards. pull storage battery plug from start power supply and remove clip from auto battery.
Product Name: Relay Smart Clip
Voltage: 12V
Practical current: 500A. instantaneous current: 700A
Cable length: total length including head: 36CM red. 28CM black
Suitable for: Low-displacement. high-displacement cars (1.5. 1.8. 2.0. 2.4. 2.5. 3.0. 3.5) displacement cars
Product features: Multi-function protection type: high voltage protection. low voltage protection. over current protection. low current protection. anti protection. anti reverse connection protection. high temperature protection. low temperature protection. short circuit protection. anti over discharge protection
Colour:Photo Color
Material:Plastic + Metal

Package Contents:
1 x clip

Only the above package content. other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• 2.Anti Over-discharge protection:Low voltage start.LED will flash at the frequency of 1HZ if the voltage is 10.5V
• 3.Anti-reverse charge protection:After the car is started.Anti-reverse charge current is less than 1A
• 5.Anti High Temperature Start:When the temperature of the jump is higher than 80 Centigrade.the smart cable will prevent the current flow.to protect the jump
• 1.Anti Short connection protection:Connect the red clip with the black clip when the power is on.No damage
• 4.Anti Reverse polarity protection:Reverse connection with the Negative and positive end of the clamp and battery terminal.No damage