Faster & Smarter Battery Charger
Equipped with a 5V / 2A USB for mobile devices make sure that you and your love ones can always get home.
A must have for your car and trip
The DS18 ATS10K will jump-start up to a 12V 3.0L gas engine car. It only take 4 hours to fully charge this car jump starter.
Specifications
– Capacity Bank: 10.000mAh
– Input: 5V / 2A
– Output: 5V / 2A for Mobile Devices
– Output: 12V for Car Jump
– Start Current: 200A
– Peak Current: 400A
– Lifetime: More than 3.000 Cycles
– Charging Time: 4 Hours
– Operating Temperature: From -4 F to 140 F
– Size: 5.3 x 3.08 x 0.78 Inches
ATTENTION
– Don’t connect the positive and negative polarity together when it’s power on. Don’t crank the engine for more than 3 seconds. Allow the jump starter to ool
down for at least 30 seconds after each jump-start.
– The maximum number of jump start a car is 4 times in two minutes
– To avoid injury and/or damage to your vehicle. do not connect the red and black clamps together
– Don’t use the product at a high temperature or place it for a long time under a high temperature environment
– Your jump starter will perform best when its battery is fully charged. If less than 30% charged. it may not be able to start your engine.
– Keep out of reach of children.
- CAPACITY BANK: 8000MAH
- INPUT: 5V/2A
- OUTPUT (MOBILE DEVICES): 5V/2A
- OUTPUT (CAR JUMP): 12V
Specifications
Brand | DS18 |
Manufacturer Part Number | DS-ATS10K |
Manufacturer | DS18 |
Assembled Product Weight | 2 lb |
Assembled Product Dimensions (L x W x H) | 9.00 x 6.00 x 3.00 Inches |
Reviews
There are no reviews yet.