Foxwell NT634 OBD2 Scanner Check Engine Transmisson ABS SRS Airbag Four System Diagnostic Scanner Auto Code Reader SAS ABS EPB Oil Reset 11 Resets EOBD OBD2 Automotive Diagnostic Tool OBD Car Scanner

?? Foxwell NT634 OBD2 Scanner Advatage Feature:

? Support 4 System Diagnostic

? Support 11 Special Functions

? Support OBDII/EOBD Engine

? Fast Identifies VIN Number

? Lifetime Free Upgrade

?? Four Main System Diagnostic:

Diagnostic Engine System: The diagnostic tool can help detect the engine ignition. fuel injection. air and fuel ratio. and exhaust emission conditions in Engine system to enhance vehicle performance. save energy and reduce exhaust emission.

Diagnostic Transmission System: It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system. or check the health status via live data viewing.

Diagnostic ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components. next you will need to retrieve ABS codes to tell you where the problem is. and this is what this scanner does for you.

Diagnostic SRS System: SRS. safety restraint system. is made up of impact sensors. a control module. and the airbags themselves. and this diagnostic device can detect every electronic parameter to check its health status.

?? Free 11 Maintenance Reset Services:

Oil Light Reset: allows you to reset the service lamps on the instrument cluster.

EPB Service: allows you to perform the service and maintenance of brake systems. including deactivation and activation of the brake control system. bleeding brake fluid. opening and closing brake pads. and setting brakes after disc or pad replacement. on multiple brands of vehicles where electronic brake systems are fitted

Battery Configuration: lets you to have new battery validated. clear faults from the dashboard and display current battery details of the vehicle.

DPF Regeneration: lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter.

TPS/TBA: Using the throttle position sensors in the throttle body. the ECU learns the full open and full closed positions through various states (idle. part throttle. WOT) known as a Throttle Body Alignment (TBA)

SAS Calibration: lets you perform calibration of the Steering Angle Sensor. On successful calibration of the sensor. its fault memory is automatically cleared.

CVT(Continuous Variable Transmission): used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.

Gear Learn: Crankshaft position sensor adaptive learning.

TPMS Programming Service: allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

Odometer: allows you to revise the date of odometer and write the original date into new odometer. (NOTE: it is exchange odometer. not adjust the mileage

Injector Coding: Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.

• ? Full OBDII 10 Functions:

  1.Reading Codes:Present some diagnostic trouble codes after scanning the vehicle.

  2.Erasing Codes:Clear the fault codes after doing the repair according to the prompt of the scanner.

  3.Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

  4.I/M Readiness:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

  5.Freeze Frame:Reads and displays live ECU/PCM data stream. plotting functions graphically and stores freeze frame data.

  6.On-Board Monitor Test:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

  7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

  8.EVAP Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

  9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number). CID (Calibration ID) and CVN (Calibration verification number). etc.

  10.DTC Lookup:Supports fault code inquiry function .and review the recorded fault codes.helps you quickly find and understand code definitions.

• ?? Additional Features:

  • One click Auto-VIN helps you automatically retrieve car information. quickly scan and diagnose four systems after connecting to the car.
  • Provide 4 in 1 real-time data stream for real-time browsing and display through multiple charts and waveforms.
  • Support the generation and saving of diagnostic reports. which can be printed and shared by connecting to a computer printer.
  • Support the use of 12V vehicles that meet the OBD2 standard protocol produced after 1996.
  • Lifetime free updates. constantly updating and fixing errors. and obtaining the latest software version and parameter information.

• ?? Package List??

  Foxwell NT634 OBD2 Scanner

  User Manual

  USB Cable

  Diagnostic Cable

  Box