Package Includes:

(1) Hifonics TPS-A600.5 600w 5-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart
(2) Pairs of Rockville RWB65B 6.5 Black 2 Way 1000 Watt Marine Wakeboard Tower Speakers
(1) Rockville MS10LB 10 2400 Watt Black Marine/Boat 10 Subwoofer with LED

Specifications of TPS-A600.5:

Variable Voltage: 0.2V~9V
Signal to Noise Ratio: >90dB
Frequency Response: 20Hz-20kHz
Crossover Frequency Range CH5: LPF 50Hz-150Hz
Bass Boost: 0-12dB@45Hz
Subsonic Filter: 60Hz
Power @ 2-Ohms: 4 x 80W + 1 x 200W
Power @ 4-Ohms: 4 x 40W + 1 x 100W
Total Channels: 5
Audio Inputs: RCA
Power Terminal 12v/GND: Molex 10 ga
Fusing: 1 x 40 Amps
Dimensions: 3.70 X 8.46 X 1.77 inches (9.4 X 21.5 X 4.5 cm)
Weight: 3.35 lbs (1.52 kg)

Video of RWB65B:

Rockville RWB65B Pair of 6.5 WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
Color : Black
6.5 Two-Way High Fidelity Speaker System
Y30 High Density Magnets
Oversized 1.25 Kapton Voice Coil

Details:

Power Rating :
Peak Power Handling : 500 Watts (250 Watts per Speaker)
RMS Power Handling : 300 Watts (150 Watts per Speaker)
Frequency Response : 70 ?C 20.000 Hz
Sound Pressure Level : 96dB @ 1w/1m
Impedance : 4 Ohms
Mounting Depth : 9

Includes:

(2) Wakeboard Speakers
Mounting Brackets
Integrated Grill
Installation Hardware

Video of MS10LB:

Max Power: 2400 Watts
RMS Program Power: 1200 Watts
RMS Power: 600 Watts
2.0 4 Layer dual voice coil
Frequency response: 30Hz-4Khz
Impedance: Dual 4 ohms
Sensitivity: 90dB
Total diameter:10.6
Cutout diameter:9.13 inches
Total height:7.2
Mounting depth:5.6

Specifications:

Free Air Resonance (Fs):

• Package Includes: (1) Hifonics TPS-A600.5 600w 5-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart. (2)(2) Rockville RWB70B Black 6.5 250w Marine Wakeboard 360 Swivel Tower Speakers. (1) Rockville MS10LB 10 2400 Watt Black Marine Free Air Subwoofer with LED. Hifonics TPS-A600.5 600w 5-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart
• Marine Grade Protection: YES – Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.. Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage – Special preamplifier reduces incoming noise from source units dramatically improving sound quality
• Inputs: 2 Pair. RCA (Front/Rear) 1 Pair. RCA (Subwoofer) Nickel-Plated – High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant. Operation Mode: Four channel and with dedicated subwoofer channel – Unique design allows this amplifier to power full range speakers with a dedicated channel for a subwoofer.
• Crossover / Signal Shaping: Switched FULL / LPF / HPF – Complete control of amplifier signal. essential when using two or more amplifiers. Class / Topology: Full Range Class D – Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.. Output Devices Technology: PWM MOSFET Power Supply – Stable power through the PC board with minimal heat generation
• Heat Sink: Aluminum – Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration. Power Supply: Simpatico Coil Design – The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Bass Remote Inluded: YES – Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.