Infinity Reference Series 1000 Watt Class D Mono Subwoofer Amplifier 10001A

BRAND NEW

INFINITY REFERENCE 10001A

1000W RMS Class-D Monoblock Subwoofer Car Amplifier

Key Features:

Compact size

The Infinity Reference 10001A amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.

High and low-level input

Speaker-level and low-level inputs allow the Reference 10001A to integrate with both aftermarket and factory car stereo systems.

Variable crossover and bass boost

Unlike many amplifiers available at similar prices. the Reference 10001A features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.

Low noise and distortion

The Reference 10001A has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line-induced radiated engine noise.

Input Level Control

When low-level inputs are used. this control adjusts the input sensitivity between 200mVrms and 2.0 Vrms. When high-level inputs are used. this control adjusts the input sensitivity between 2Vrms and 20Vrms.

Full on-board protection

On-board circuitry protects the Reference 10001A from shorts. high-temperature. overvoltage. and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.

Phase Switch

This switch changes the input phase to inverted or noninverted.

RBC wired remote

The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver’s seat.

Specifications:

• 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
• Class D amp technology
• Frequency Response: 10-320 Hz
• Variable low-pass filter (32-320 Hz. 12 dB/octave)
• Variable bass boost (0-12dB at 45Hz)
• Phase Switch (0. 180 degrees)
• Wired remote level control included
• Preamp inputs and outputs
• Speaker-level inputs (speaker wire-to-RCA adapters included)
• 4-gauge power and ground leads recommended ?? wiring and hardware not included with amplifier
• Fuse rating: 35A x 3
• WxHxD=320mm x 55.5mm x 180mm
• WxHxD=12-5/8 x 2-3/16 x 7-1/8
• 1000w RMS / 2000W MAX

1. mono subwoofer amplifier
2. 600 watts RMS x 1 at 4 ohms
3. 1000 watts RMS x 1 at 2 ohms
4. 2000 total watts RMS x 1 at 4 ohms when strapped to a second Reference 10001A
5. Class D amp technology
6. variable low-pass filter (32-320 Hz. 12 dB/octave)
7. variable bass boost (0-12 dB at 45 Hz)
8. phase switch (0. 180 degrees)
9. wired remote bass control module included
10. preamp and speaker-level inputs
11. bare wire to RCA adapters included for high-level input
12. preamp outputs
13. wiring and hardware not included with amplifier
14. 4-gauge power and ground leads recommended
15. fuse rating: 35A x 3
16. dimensions: 12-5/8W x 2-1/4H x 7-3/4D
17. Mono subwoofer car amplifier
18. 600 watts RMS x 1 at 4 ohms
19. 1000 watts RMS x 1 at 2 ohms
20. Class D amp technology
21. Frequency response: 10?C320Hz
22. Variable low-pass filter (32?C320Hz. 12dB/octave)
23. Variable bass boost (0?C12dB at 45Hz)
24. Phase switch (0. 180 degrees)
25. Wired remote level control included
26. Preamp inputs and outputs
27. Speaker-level inputs (speaker wire-to-RCA
28. adapters included)
29. 4-gauge power and ground leads recommended ??
30. wiring and hardware not included with amplifier
31. Fuse rating: 35A x 3
32. W x H x D = 320mm x 55.5mm x 180mm
33. W x H x D = 12-5/8 x 2-3/16 x 7-1/8
• UPC: 050667375485
• Weight: 10