Helmet Headphone is a convenient and useful products for motocyle and bike riders. A rider has no need take out the phones and press buttons to answer incoming calls. 

As Helmet Headphones is designed with automatically phone call answer function. hands by automatically answered after 3 ring tones. Be safe while your driving.

Specification:

Bluetooth Version: 5.0+EDR

Frequency: 2.4026-2.480GHz

Battery Capacity:700mAh

Li-ion Battery: 3.7V/700mAh

Bluetooth Range: 20 meters

Charging Time: About 2-3H

Working Time: 50H

Standby Time: 500H

How to use?

Step1:Take out the Helmet Headphone from the color box.stick theMagic Tapeon both earphones.

Step2:Tear off the 3M tape paper of the earphones.and sitck it into the helmet ear position of both sides.before stick it.please align the position well.

Step3:Stick the Helmet Headphones to the Velcro.Which is inside the helmet.

Step4:Finish installation.

About FAQ:

1. pair with a mobile phone? Manual pairing (first time)

Step 1: long press the dial button for 3 seconds. the LED indicator flashes red and blue alternately. and enters the Bluetooth pairing state.

Step 2: Turn on the Bluetooth of the mobile phone. enter the Bluetooth list. select the Bluetooth name . and click Connect. After the connection is successful. the LED indicator will flash slowly in blue.

2. Automatically re-pair (after pairing)

If the phone has been paired with the headset. turning the headset on again will automatically re-pair. (Note: the mobile phone must be within the effective range)

3. Pairing with dual phones?

When the pairing of A mobile phone is completed successfully. the Bluetooth connection of A mobile phone needs to be disconnected. Refer to steps 1-2 to re-pair the headset with the B mobile phone. Then turn on the A mobile phone to connect the headset Bluetooth. At this time. both A and B are connected Audio.

Warm prompt

Due to the influence of wind noise.tire noise and helmet type in high-speed riding. the sound 

quality and volume of the motorcycle Bluetooth headset will be affected. 

The correct installation position of the motorcycle helmet speakers will bring a better sound 

quality experience. we make a few suggestions: 

1.We recommend that you connect the motorcycle Bluetooth headsets to your mobile 

phone when receiving it and put the speakers on your ears to listen to the sound quality and volume. 

Because the installation position and the distance of the ear have different effects on the sound quality and volume. 

The way to increase the volume is to install the speakers as close to the ear as possible 

2.You can install the speakers in the earphone slots of helmet or stick them in other place by velcro. 

If the speakers are installed in the earphone slots. they not close enough to your ears. 

that’s why some riders feel that the sound volume is low. 

5. Full face helmet is recommended for fastened windshield can physically decrease noise partly.

If not. please adjust the microphone to close to your mouth for better pick-up of your voice

Package Included:

1*Helmet Bluetooth Helmet Headset

1*Charging USB Cable

1*User Manual

4*Headphone VELCRO

• ??Bluetooth 5.0??: Bluetooth V5.0. Effective Distance 20m. compatible with all Bluetooth-enabled smart devices.Strong signal connection. ??Handsfree??The phone automatically answers after 3 rings to allow you to speak with your friends or business partners freely
• ??Long Play Time??A built-in 700mAh rechargeable Li-ion battery supports 30 hours of continuous talk and play time and 250 hours standby time. Convenient for motorcycle driving. takeout. express delivery. outdoor sports. snowboarding. skating. etc.
• ??Louder Volume & Noise Reduction??: Engineer replaced a better quality speaker??By using windproof and noise cancelling technology. this helmet headset transfers clear and high-quality stereo music sound. Solves the sound problem of high-speed driving
• ??Waterproof ??No disturb Dustproof and IPX7 Waterproof by using Nano coating technology. No matter if you ride through the rain or on dusty streets. the headset is protected.
• ??Support one-for-two and Battery Display??: New version of the helmet headset can connect two mobile phones at the same time. and the battery power can be displayed on the mobile phone screen.
• ??Easy to Install??Designed with detachable velcro. one can easily install the headset into the helmet.