Rockville RXM-T1 1500 Watt Peak Marine/Boat 2 Channel Amplifier Stereo Amp

Video of RXM-T1:

Description:

Over the years. the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean. sleek design to its high quality components. you will be amazed at the quality and power that these new Phenom amps offer.

The RXM-T1 is a 2 channel marine amplifier with 1.500 Watts peak output and 500 Watts MS (2x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker. Rockford. Alpine. etc.

The RXM-T1 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture. dust. chemicals. and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.

One of the tricks to determine the real power of an amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-T1 features a 50 Amp Maxi Fuse. Compare this to other amps on the market with similar fuse ratings.

Features:

Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N
370 Watts (2 x 185 Watts) at 2 ohms < 1% THD
1 x 370 Watts bridged @ 4 Ohms < 1% THD
Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms)
High-Speed MOSFET Power Supply
Studio-Grade Bipolar Output Stage Transistors
Fully Adjustable 12dB / Octave Crossover
Low Pass Filter : 50Hz – 250Hz
High Pass Filter : 15Hz – 250Hz
Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
2-Ohm Stable Stereo
4-Ohm Mono Bridgeable
Mute and Delay Soft Start System
Full IC-Controlled Protection Circuitry
RCA Preamp Line Output
ELNA Brand Audiophile Capacitors
8 Volt Preamp Circuitry

• Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp.
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc). 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter : 50Hz – 250Hz. High Pass Filter : 15Hz – 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable.
• Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%.
• Frequency Response : 10Hz – 40KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.6 x 2 x 13