RV Water Pressure Regulator for RV Camper. Brass Lead-Free Adjustable RV Water Pressure Regulator with Gauge

RV Water Pressure Regulator for RV Camper. Brass Lead-free. Adjustable RV Water Pressure Regulator with Gauge. RV Water Regulator for Camper Travel Trailer
The operation of the pressure-reducing valve is based on the balance between two opposing forces:
1. The thrust of the spring to open the flow passage cross section.
2. The thrust of the diaphragm to close the flow passage cross section.
Operation with water flow
When opening the draw-off outlet. the force of the spring prevails over that of the diaphragm.
The obturator moves downwards. thereby opening the valve to the flow of water.
The greater the demand for water. the lower the pressure under the diaphragm. This results in a greater flow of water through the passage cross section.

Operation without water flow
When closing the draw-off outlet. the downstream pressure rises and pushes the diaphragm upwards. This closes off the passage cross-section from the flow of water and keeps the pressure constant at the setting value. The slightest difference in favor of the force exercised by the diaphragm over that of the spring causes the device to close.

Instructions
Connect the female fitting on the adjustable water regulator to your water source’s hose bib.
Connect the female fitting on the water hose to the male fitting on the adjustable water regulator.
Turn on the water supply to flush the water regulator and hose for one minute. Turn off the water supply.
Connect the hose to your RV’s water inlet. and then turn on the water supply.
Turn on all RC fixtures flush out of the RV plumbing?Cthis includes turning on showers. faucets and flushing toilets.
Adjust the regulator screw (found at the top of the cap on the regulator) until it is set to the desired pressure reading. Turn off all RV fixtures before making adjustments to the regulator screw until you reach the desired pressure reading.
Specifications
Material: lead-free brass
Applicable medium: water
Connection: Thread
Nominal diameter: DN20
Structure: straight-through
Pressure environment: atmospheric pressure
Operating temperature: 14F ~ 200F
Thread: 3/4 NH thread
Drive: Manual
Direction of flow: Unidirectional
Maximum Pressure: 160 psi

• Long Service Life: Lead free brass pressure is filled with high class silicone oil.improve pointer accuracy.Reduce friction of internal components prevent vibration and pulsation proof. and the sealing is stronger. extender use life.Oil filled gauge is the best way to go for shock and corrosion resistance. 

• Adjustable: Factory Setting: 45 PSI. adjust pressure up to 160 PSI. water pressure setting can be easily adjusted whatever water pressure you need by turning the screwdriver. Turn clockwise to increase pressure. turn counterclockwise to decrease pressure.

• Lead-Free And High-Quality: This regulator has the lowest amount of lead of any regulator currently on the market. ensuring it’s safe for your family to use. Every batch of regulators is tested to ensure it contains less than .13% lead. well below NSF lead requirements of .25%. It’s also made with high-quality materials and shipped in a durable. padded cardboard box for long-term storage.

• Wide Compatibility: The brass lead-free water pressure reducer is suitable for 3/4 outdoor hose threads and NH threads. compatible with all American water supply systems.The inlet filter on the regulator can help you filter out sands and others. protect your pipe system for long time using.

• Gauge Display: The water pressure can be seen on the gauge. it’s necessary for RVs. campers. and travel trailers.