SHZOND 30MPA 4500PSI High Pressure Air Pump 13.2GPM Air Flow Rate PCP Compressor 1.8KW Air Compressor Pump

High pressure 30Mpa electric pump can be used for fire fighting. air soft. paintball. leakage detecting. pressure-tight test. automobile tyres. etc.

Specification

Power Rating :1.8KW

Inflating Speed : 2800R/Min

Air Flow Rate : 13.2GPM

Working Pressure : 0-300BAR 0-30MPA 0-4500PSI

Noise : MAX 85DB

Cooling System: Water Cooling

Compression Stage: Two Stage

Lubrication Mode: Splash Type

Material of Cover: Cast Aluminum

Material of Motor: 100% Pure Copper

Test Inflating Result: It takes 5 mins to fill full 0.45L tank to 4500PSI

Test Inflating Result:It takes 12 mins to fill full 1L tank to 300 BAR

Package Content

30Mpa Electric Compressor Pump x 1

Water Pump x 1

Water Pipe x 2

Hose Female x 1

Air cock x 1

Pressure relief screw x 2

Wearing parts x 1

English Manual x 1

Warning:

1 If abnormal noise occurred during the using of the product. please stop using it instantly and check the cause.

2 The product should be placed at a place that it couldn’t be touched by children.

3. Please do not use it in moist and flammable place.

4. Please do not modify it arbitrarily. disassembling and repair by non-technical personnel is not allowed.

6. Make sure the socket could withstand a current greater than 8A before using it. or the circuit might be burnt. the product might be damaged and the dangers may be caused due to overload of the socket.

7. Please do not touch the head section after the machine was just being used. so as to not be burnt by high temperature.

8. When it is used for inflating slightly larger container. the cooling water should be changed every 30 minutes. in this way. the cylinder temperature could be could be better controlled.

9.The machine oil should be checked regularly. make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black. it should be changed in time.

• High pressure air pump power Rating: 1.8 KW.Inflating speed: 2800 R/Min.Air Flow Rate: 13.2GPM. Working Pressure: 0-300 BAR 0-30 MPA 0-4500 PSI.
• Cooling system : water cooling.Compression stage : two stage.Lubrication mode: splash type.
• The airgun compressor must be working with oil. so you must pay attention to the level of oil.
• The air compressor is equipped with high pressure rubber hose. to apply to multipurpose use.Large displacement. quick air inflation. which could be not only used for diving fire cylinder. but also could be used in car. lorry. truck and other automobiles.
• ??WARNING??Attention: Please read the operation manual carefully before installation and operation.Please replace the oil tank cap with the breathing rod before compressor starts.