Smart RC Battery Charger for 4.8V 7.2V 8.4V 9.6V Battery Pack. RC Car Charger for T-raxxas Battery 2.4V-12V NiMH/NiCD Battery Pack

2.4V-12V NiMH NiCd Battery Pack Smart Charger

Features:

AC100-240V wide voltage input.

Ultra-low backflow current < 1uA. even if the battery is not connected to the power supply and connected to the charger for a long time. it will not cause the battery to be over-discharged and damage the battery.

2.4V-12V automatic identification. automatically adjust the best charging parameters.

The 0-voltage battery pack can be activated and charged.

Bad battery identification. for a battery that cannot be activated at all. it is judged as a bad battery.

Battery packs with protection diodes can be charged.

Short circuit protection. reverse polarity protection. maximum time.

Various ways to judge saturation: -??V. 0??V.

The charger is a dedicated smart charger for 2.4V-12V NiMH and NiCd battery packs.

The charger uses a 12-bit ADC high-precision single-chip microcomputer to control the output interface. The monitoring resolution can reach 5mV. which can accurately judge the battery status and automatically stop when fully charged.

Indicator light:

Red and blue lights flash once After the charger is connected to the (AC) power supply. the red and blue lights flash once. indicating that the charger is initialized.

A solid purple light indicates that the power supply (AC) is properly connected. and no battery is connected.

Steady red light Charging is in progress.

A solid blue light indicates that the battery is fully charged.

The red and blue lights flash alternately. indicating that the battery polarity is reversed.

Flashing red light indicates that the battery is damaged or the interface is shorted for more than 6 minutes.

Output plug: DC 5.5??2.1mm

Power cord: 1.5M

Can charge 2.4V-12V 200-3000mAH NiMH or NiCd battery pack.

Input voltage 85 – 265 V

Input current – – 0.2 A

Output voltage No load 18.5 19 19.8 V

Charge Current Auto Adjust 400 – 1100 mA

Maximum charging time 9.8H 10H 10.2H

inbox:

1pcs 2.4V-12V RC Charger.

1pcs RC charging plug.

• ??Smart RC Battery Charger??Smart Charge for NiMH/NiCd battery pack (2.4V.3.6V.4.8V.6.0V.7.2V.8.4V.9.6V. 10.8V.12V Battery). Support RC helicopters. tamiya rc trucks. Airsoft gun. RC Cars and remote controlled toys battey. Charging time is 6-10 hours depends on your battery capacity.
• ??8 Different RC Charging Plugs??Includes T Plug. Huanqi Plug. Tamiya battery Plug. mini tamiya battery plug. JST battery plug. SM 2P battery plug. Futaba/JR Receiver Plug.
• ??12V RC Charger??Smart RC Charger for 2.4V-12V NiMH / NiCd battery packs. ADC smart charging manage system. the battery pack will be charged more fully and more balanced. Built-in protections guards against over-charge. over-current. short circuit and reverse polarity. protects your battery and extend life. 0-voltage battery packs can be activated to charge NOTE: This charger is only for recharging NiMH/NiCd batteries. do not charge LiPo batteries.
• ??Smart Universal Charger??The universal 100-240V AC input enables this charger to be used anywhere. LED light on the charger stays in Red during charging process and turns blue when battery is fully charged. Flashing red indicates that there is a bad connection. The blinking red and blue indicator indicates that the battery polarity is inversely connected.
• ??What you get??1pcs 2.4V-12V RC Charger. 1pcs RC charging plug.