Suntec A2RA-7720 Waste Oil Pump 0.4-2.5 GPH 10/100 PSI 1725/3450 RPM

Suntec A2RA-7720 Waste Oil Pump 0.4-2.5 GPH 10/100 PSI 1725/3450 RPMSpecifications:A – Single Stage2- 3450 RPMR – 30 X 30 MeshA- R.H. Rotation – R.H. Nozzle77 – Hub 54 mm. Lip Seal20 – Mounting Style and Standard PumpsThis Pumps Is Rated For Waste Oil. Number 4 (# 4) and Lighter Fuel OilsSeparate Regulator And Shutoff RequiredSpecifications:Inlet port (std) 1/4 NPTFAlt. Inlet port 1/4 NPTFNozzle outlet (non plug in side) 1/8 NPTFAlt. nozzle port#1 (gauge port) 1/8 NPTFAlt. nozzle port#2 (side opposite bleeder) 1/8 NPTFRelief valve port 1/8 NPTFPressure gauge port 1/8 NPTFBleeder valve port 1/8 NPSFExternal pressure regulator needed YesCut-off at nozzle plug port No cut-off – separate shut-off valve is requiredCut-off at alternate nozzle plug port No cut-off – separate shut-off valve is requiredStrainer (internal to pump. from SUNTEC) 30×30 mesh (build into pump)Strainer (external to pump. from Installer) 100×100 mesh inlet line strainer min. 10 micron highly recommendedShaft diameter 5/16 inHydraulic DataNozzle pressure range 0-15 psi @ 135 rpm. 0-30 psi @ 1725 rpm. 0-150 rpm @ 3450 rpmRelief pressure 60 +/-10 psi – Caution: Relief valve port must be open to tank or unsafepressures can result !Factory pressure setting N/A – Separate pressure regulator & shutoff valve required.Outlet flow rate (Gph) 0.40 @ 10 psi & 135 rpm. 2.5 max @ 110 psi & 1725 or 3450 rpm.Oil temperature 50 – 115 FInlet pressure 10 psi maxOperating vacuum 20" Hg max.(waste oil and #4 fuel) 10" Hg max.(#2 and lighter fuel) to prevent air separation from oilMotor Speed 100 rpm to 3450 rpmRequired Motor HP 1/8 HP 1725 rpm. 1/7 HP 3450 rpmRecommended inlet line length (Ft) 1/2" line 20′ max. 3/4" line 90’max.Lift (FT)Waste oil & fuel equivalent to No. 4: 14" max. No. 2 & lighter fuel oil: 8′ max.A2RA7720 Is The Same As CleanBurn 32475. Clean Burn 32475Suntec A2RA-7720 Waste Oil Pump 0.4-2.5 GPH 10/100 PSI 1725/3450 RPM Specifications:A – Single Stage2- 3450 RPMR – 30 X 30 MeshA- R.H. Rotation – R.H. Nozzle77 – Hub 54 mm. Lip Seal20 – Mounting Style and Standard PumpsThis Pumps Is Rated For Waste Oil. Number 4 (# 4) and Lighter Fuel Oils Separate Regulator And Shutoff Required Specifications:Inlet port (std) 1/4 NPTFAlt. Inlet port 1/4 NPTFNozzle outlet (non plug in side) 1/8 NPTFAlt. nozzle port#1 (gauge port) 1/8 NPTFAlt. nozzle port#2 (side opposite bleeder) 1/8 NPTFRelief valve port 1/8 NPTFPressure gauge port 1/8 NPTFBleeder valve port 1/8 NPSFExternal pressure regulator needed YesCut-off at nozzle plug port No cut-off – separate shut-off valve is requiredCut-off at alternate nozzle plug port No cut-off – separate shut-off valve is requiredStrainer (internal to pump. from SUNTEC) 30×30 mesh (build into pump)Strainer (external to pump. from Installer) 100×100 mesh inlet line strainer min. 10 micron highly recommendedShaft diameter 5/16 inHydraulic DataNozzle pressure range 0-15 psi @ 135 rpm. 0-30 psi @ 1725 rpm. 0-150 rpm @ 3450 rpmRelief pressure 60 +/-10 psi – Caution: Relief valve port must be open to tank or unsafepressures can result !Factory pressure setting N/A – Separate pressure regulator & shutoff valve required.Outlet flow rate (Gph) 0.40 @ 10 psi & 135 rpm. 2.5 max @ 110 psi & 1725 or 3450 rpm.Oil temperature 50 – 115 FInlet pressure 10 psi maxOperating vacuum 20 Hg max.(waste oil and #4 fuel) 10 Hg max.(#2 and lighter fuel) to prevent air separation from oilMotor Speed 100 rpm to 3450 rpmRequired Motor HP 1/8 HP 1725 rpm. 1/7 HP 3450 rpmRecommended inlet line length (Ft) 1/2 line 20′ max. 3/4 line 90’max.Lift (FT)Waste oil & fuel equivalent to No. 4: 14 max. No. 2 & lighter fuel oil: 8′ max.A2RA7720