Highlight description:
??Automotive OBD2 Scanner??The cable can be used in conjunction with for Ford Mazda Lincoln and .Mercury vehicles since 1996 to read the sensor data of the modules. read and reset the diagnostic fault codes of all modules. and run diagnostic tests and service programs. Run the test diagnostic program. Run the service program.
??Conversion Cable??The latest version V2.3.7. suitable for ELM327 and J2534 Pass-Thru compatible adapters. The cable is built into the FTDI chip and is used to pre-configure to access most other modules that are not accessible to ELM on Ford. Mazda. Lincoln. and Mercury vehicles.
??Operating System Support??This cable is suitable for all 32-bit and 64-bit Windows 2000/XP/Vista/7/8/8.1 does not support wifi or Bluetooth.
??Supported Software??This cable supports for FORScan. ELMconfig. FF2. Foccus. ScanMaster ELM v2.1 and Scantool.net.
??Warm Service?? You will like this practical product. But if you are not completely satisfied with our product. please contact us without hesitation.

Detailed description:
Product Name: ELS27 Diagnostic Cable
Shell material: ABS
Cable length: 1.5m/59inch
Supported modules:
Almost all of modules available through supported protocols.
Powertrain Control Module (PCM)
Anti-Lock Brake / Traction Control Module (ABS)
Hybrid Electronic Cluster (H
Supported protocol: ELM327
J2534 Pass-Thru
CANtieCAR (in FORScan mode)
OBDLink SX/MX (STN11xx)
ELS27 (STN1170)
Supported protocols and bus:
FORD HS CAN
FORD MS CAN (only for J2534-2. CANtieCAR. OBDLink MX. ELS27 or modified ELM327)
FORD SCP
FORD 9141

Note:
Due to manual measurement. there will be an error of 1-3 cm.

• [Automotive OBD2 Scanner]The cable can be used in conjunction with for Ford Mazda Lincoln and .Mercury vehicles since 1996 to read the sensor data of the modules. read and reset the diagnostic fault codes of all modules. and run diagnostic tests and service programs. Run the test diagnostic program. Run the service program.
• [Conversion Cable]The latest version V2.3.7. suitable for ELM327 and J2534 Pass-Thru compatible adapters. The cable is built into the FTDI chip and is used to pre-configure to access most other modules that are not accessible to ELM on Ford. Mazda. Lincoln. and Mercury vehicles.
• [Operating System Support]This cable is suitable for all 32-bit and 64-bit Windows 2000/XP/Vista/7/8/8.1 does not support wifi or Bluetooth.
• [Supported Software]This cable supports for FORScan. ELMconfig. FF2. Foccus. ScanMaster ELM v2.1 and Scantool.net.
• [Warm Service] You will like this practical product. But if you are not completely satisfied with our product. please contact us without hesitation.