YIYIBYUS Engine Oil Pump Transmission Oil Fluid Extractor Electric Transfer Pump Motor for Car Boat 12V

Specification:

100% brand new and high quality

Material: Metal + Plastic

Color: Black

Rated Voltage: DC 12V

Rated Power: 60W

Maximum Flow: Maximum 5L/min when pumping. Viscous liquid flow rate will decrease 

Maximum Pressure: 0.8MPA

Pump Diameter: Approx. 5 cm / 1.97

Length: Approx. 16cm / 6.3

Cable Length: Approx. 60cm / 23.62

Clips Length: Approx. 8cm / 3.15

Outlet PVC pipe Length:150cm

Nylon pipe Length:100cm

Quantity: 1 pc

How to use: 

• Start to run the car engine for a while. when oil temperature turns to be about 50 degrees. start pumping oil
• Connect the pump to the power. run it for a while. and observe whether the inlet and outlet is normal
• Open the filler cap.get dipstick out. force the tube into the bottom of the joint. until the tube does not move
• Then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank. the bottom concave place. in order to pump the oil completely)
• As no oil or pumping up very slowly or intermittently. it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)
• After oil pumping. remove the tube. and then run the pump for a while. pump the remaining oil inside the pumping clean. or pump water for a while until the pump head gets clean
• If you have not used it for a long time. it may have no suction. then just pour the water in the pump. and run the pump for a few minutes until the air is all out

What is included:

1x Oil Pump

1x 11mm Outlet PVC pipe

1x 6mm Nylon pipe

• 100% brand new and high quality. Material: Metal + Plastic. Rated Voltage: DC 12V. Maximum Flow: 5L/min
• It is an ideal equipment for quick and clean oil-changes
• If you have not used it for a long time. it may have no suction. then just pour the water in the pump. and run the pump for a few minutes until the air is all out
• As no oil or pumping up very slowly or intermittently. it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)
• Application – Widely used in general industrial equipment. medical equipment. chemical equipment. vehicle cleaning. agricultural spraying. pipeline pressure. air cleaning cooling. coal and metallurgical industries.shipbuilding. drinks. carpet and floor cleaning. water purification and water treatment equipment